Sunday, July 25, 2010

Five half-free semiconductor 5 is not the final version of the draft statement for the


"This is the work of the State Council, a matter of time before the file did not come out, who said it is false." The Government will introduce in the second half of the new policies that support the semiconductor industry to say, the China Semiconductor Industry Association, the Secretary-General, Ministry of Information Industry Products Xu Xiatian Division inspector on the "First Financial Daily" said that he could not estimate the time the introduction of the new policy.

The media had reported "five five half-free," the new policy, the Chinese Semiconductor Association Ke Li explained that this is a discussion meeting of experts to form the first draft of the opinion. Specifically, the semiconductor company is profitable from the beginning of the year, the first to be exempted from enterprise income tax year, half of the sixth to the tenth year income tax.

Li Ke said that in five or six months of the expert panel convened meeting, the participating experts was formed on the first draft without significant opposition, but this policy is responsible for Development and Reform Commission, Ministry of Finance, Ministry of Information Industry, Ministry of Commerce, State Administration of Taxation General Administration of Customs and other ministries will be the second instance of the content of the policy, the three trial, "If there is no accident that this policy can come out the second half." But he also admits, "policy no one said a bad thing."

Xu Xiatian also believe that, in accordance with the original statement, the new policy will be introduced late last year, but then nothing happened, indicating that there are still many problems which need to be addressed.

In fact, the new semiconductor policy will be introduced to foster the news began to spread from last year, "the statement from the 18, there will be a day of cultural modification." Beijing Semiconductor Industry Association, the source said. Related departments last year entered the pre-feasibility study stage, and through visits to companies for advice.

However, the content of this article may affect some businesses do not. Shanghai Hua Hong NEC Electronics Co., Ltd. Vice President Wang Guoguang on that document under 18, Hua Hong has been able to enjoy the "five five half-free" offers.

Li Ke said that before this policy only for a very few number of companies, the new policy will be extended to all enterprises, whether local enterprises, foreign enterprises or large enterprises, small and medium enterprises, can enjoy this offer.

He said the new policy in the second instance, third instance of the process, the first draft of part of the content may be deleted, but added it is unlikely, the more certain is that the state will set up special funds to support the content of the semiconductor industry, as the "five five half-free "is retained, also saw the final version of the finalized policy.

Implemented since 2000 to "encourage the development of software and IC industry, a number of policy" has been the industry known as No. 18 document. Because of this policy by the United States and the European Union's opposition, from April 1, 2005, the Chinese government decided not to levy VAT on semiconductors, but the introduction of new policies to further support the semiconductor industry.






Recommended links:



Comments: Analysis Of "anti-monopoly Law" Applies To Objects



Who can resist the LAYOFFS hit the door



New Web Servers



Wizard Multimedia Creation Tools



Rmvb



Avi To Mp4



Registry TOOLS Storage



FREEBSD5.0KDE Chinese interface settings



Convert Avi To Wmv



Invoicing the concept of the perfect model



Beautiful images grabbed



Factory mode advantages



Reluctance OF a retail survival



2005 Nanjing International Exhibition printing equipment and supplies



mov Video



Job 10 kinds of unhealthy attitude towards students



Tuesday, July 20, 2010

C language library function (G class letters) - 1


Function name: gcvt
Function: string to float conversion
Usage: char * gcvt (double value, int ndigit, char * buf);
Program example:
# Include
# Include

int main (void)
(
char str [25];
double num;
int sig = 5; / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware significant digits backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news : 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read -only /

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware a regular number backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
num = 9.876;
gcvt (num, sig, str);
printf ("string =% sn", str);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware a negative number backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
num = -123.4567;
gcvt (num, sig, str);
printf ("string =% sn", str);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware scientific notation backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
num = 0.678e5;
gcvt (num, sig, str);
printf ("string =% sn", str);

return (0);
)




Function name: geninterrupt
Function: to produce a soft interrupt
Usage: void geninterrupt (int intr_num);
Program example:

# Include
# Include

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware function prototype backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
void writechar (char ch);

int main (void)
(
clrscr ();
gotoxy (80,25);
writechar (''*'');
getch ();
return 0;
)

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware
outputs a character at the current cursor
position using the video BIOS to avoid the
scrolling of the screen when writing to
location (80,25).
backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /

void writechar (char ch)
(
struct text_info ti;
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware grab current text settings backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
gettextinfo (& ti);
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware interrupt 0x10 sub-function 9 backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read- only /
_AH = 9;
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware character to be output backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
_AL = Ch;
_BH = 0; / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware video page backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read- only /
_BL = Ti.attribute; / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware video attribute backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict- read-only /
_CX = 1; / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware repetition factor backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read- only /
geninterrupt (0x10); / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware output the char backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict- read-only /
)



Function name: getarccoords
Function: get the coordinates of the last call to arc
Usage: void far getarccoords (struct arccoordstype far * arccoords);
Program example:

# Include
# Include
# Include
# Include

int main (void)
(
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware request auto detection backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
int gdriver = DETECT, gmode, errorcode;
struct arccoordstype arcinfo;
int midx, midy;
int stangle = 45, endangle = 270;
char sstr [80], estr [80];

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware initialize graphics and local variables backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
initgraph (& gdriver, & gmode, "");

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware read result of initialization backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
errorcode = graphresult ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware an error occurred backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
if (errorcode! = grOk)
(
printf ("Graphics error:% sn",
grapherrormsg (errorcode));
printf ("Press any key to halt:");
getch ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware terminate with an error code backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
exit (1);
)

midx = getmaxx () / 2;
midy = getmaxy () / 2;

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware draw arc and get coordinates backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
setcolor (getmaxcolor ());
arc (midx, midy, stangle, endangle, 100);
getarccoords (& arcinfo);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware convert arc information into strings backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
sprintf (sstr, "*- (% d,% d)",
arcinfo.xstart, arcinfo.ystart);
sprintf (estr, "*- (% d,% d)",
arcinfo.xend, arcinfo.yend);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware output the arc information backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
outtextxy (arcinfo.xstart,
arcinfo.ystart, sstr);
outtextxy (arcinfo.xend,
arcinfo.yend, estr);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware clean up backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
getch ();
closegraph ();
return 0;
)




Function name: getaspectratio
Function: Returns the current graphics mode of the aspect ratio
Usage: void far getaspectratio (int far * xasp, int far * yasp);
Program example:

# Include
# Include
# Include
# Include

int main (void)
(
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware request auto detection backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
int gdriver = DETECT, gmode, errorcode;
int xasp, yasp, midx, midy;

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware initialize graphics and local variables backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
initgraph (& gdriver, & gmode, "");

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware read result of initialization backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
errorcode = graphresult ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware an error occurred backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
if (errorcode! = grOk)
(
printf ("Graphics error:% sn",
grapherrormsg (errorcode));
printf ("Press any key to halt:");
getch ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware terminate with an error code backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
exit (1);
)

midx = getmaxx () / 2;
midy = getmaxy () / 2;
setcolor (getmaxcolor ());

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware get current aspect ratio settings backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
getaspectratio (& xasp, & yasp);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware draw normal circle backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
circle (midx, midy, 100);
getch ();

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware draw wide circle backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
cleardevice ();
setaspectratio (xasp / 2, yasp);
circle (midx, midy, 100);
getch ();

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware draw narrow circle backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
cleardevice ();
setaspectratio (xasp, yasp / 2);
circle (midx, midy, 100);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware clean up backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
getch ();
closegraph ();
return 0;
)




Function name: getbkcolor
Function: Returns the current background color
Usage: int far getbkcolor (void);
Program example:

# Include
# Include
# Include
# Include
# Include

int main (void)
(
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware request auto detection backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
int gdriver = DETECT, gmode, errorcode;
int bkcolor, midx, midy;
char bkname [35];

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware initialize graphics and local variables backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
initgraph (& gdriver, & gmode, "");

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware read result of initialization backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
errorcode = graphresult ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware an error occurred backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
if (errorcode! = grOk)
(
printf ("Graphics error:% sn",
grapherrormsg (errorcode));
printf ("Press any key to halt:");
getch ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware terminate with an error code backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
exit (1);
)

midx = getmaxx () / 2;
midy = getmaxy () / 2;
setcolor (getmaxcolor ());

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware for centering text on the display backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read- only /
settextjustify (CENTER_TEXT, CENTER_TEXT);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware get the current background color backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
bkcolor = getbkcolor ();

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware convert color value into a string backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read- only /
itoa (bkcolor, bkname, 10);
strcat (bkname,
"Is the current background color.");

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware display a message backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
outtextxy (midx, midy, bkname);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware clean up backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
getch ();
closegraph ();
return 0;
)




Function name: getc
Function: get character from stream
Usage: int getc (FILE * stream);
Program example:

# Include

int main (void)
(
char ch;

printf ("Input a character:");
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware read a character from the
standard input stream backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
ch = getc (stdin);
printf ("The character input was:''% c''n",
ch);
return 0;
)




Function name: getcbrk
Function: Get Control_break set
Usage: int getcbrk (void);
Program example:

# Include
# Include

int main (void)
(
if (getcbrk ())
printf ("Cntrl-brk flag is onn");
else
printf ("Cntrl-brk flag is offn");

return 0;
)



Function name: getch
Function: No echo from the console to get a character
Usage: int getch (void);
Program example:

# Include
# Include

int main (void)
(
char ch;

printf ("Input a character:");
ch = getche ();
printf ("nYou input a''% c''n", ch);
return 0;
)



Function name: getchar
Function: read characters from stdin stream
Usage: int getchar (void);
Program example:

# Include

int main (void)
(
int c;

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware Note that getchar reads from stdin and
is line buffered; this means it will
not return until you press ENTER. backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict -read-only /

while ((c = getchar ())! =''n'')
printf ("% c", c);

return 0;
)



Function name: getche
Function: get characters from the console (back to the display)
Usage: int getche (void);
Program example:

# Include
# Include

int main (void)
(
char ch;

printf ("Input a character:");
ch = getche ();
printf ("nYou input a''% c''n", ch);
return 0;
)



Function name: getcolor
Function: Returns the current paint line color
Usage: int far getcolor (void);
Program example:

# Include
# Include
# Include
# Include
# Include

int main (void)
(
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware request auto detection backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
int gdriver = DETECT, gmode, errorcode;
int color, midx, midy;
char colname [35];

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware initialize graphics and local variables backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
initgraph (& gdriver, & gmode, "");

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware read result of initialization backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
errorcode = graphresult ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware an error occurred backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
if (errorcode! = grOk)
(
printf ("Graphics error:% sn",
grapherrormsg (errorcode));
printf ("Press any key to halt:");
getch ();
/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware terminate with an error code backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
exit (1);
)

midx = getmaxx () / 2;
midy = getmaxy () / 2;
setcolor (getmaxcolor ());

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware for centering text on the display backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read- only /
settextjustify (CENTER_TEXT, CENTER_TEXT);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware get the current drawing color backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
color = getcolor ();

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware convert color value into a string backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read- only /
itoa (color, colname, 10);
strcat (colname,
"Is the current drawing color.");

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware display a message backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news : 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
outtextxy (midx, midy, colname);

/ Bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware clean up backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
getch ();
closegraph ();
return 0;
)



Function name: getcurdir
Function: get the specified drive the current directory
Usage: int getcurdir (int drive, char * direc);
Program example:

# Include
# Include
# Include

char * current_directory (char * path)
(
strcpy (path, "X: \"); / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware fill string with form of response: X: backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
path [0] =''A''+ getdisk (); / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware replace X with current drive letter backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news : 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
getcurdir (0, path +3); / bin / boot / dev / etc / home / lib / lost + found / media / misc / mnt / net / opt / proc / root / sbin / selinux / srv / sys / tmp / u01 / usr / var / vmware fill rest of string with current directory backup / bin / bin_old / conf / data / eshow / log / maint / news: 10 / news: 11 / news: 12 / news: 13 / news: 14 / news: 15 / news: 16 / news: 17 / news: 18 / news: 2 / news: 3 / news: 4 / news: 5 / news: 6 / news: 7 / news: 8 / news: 9 / seeds / svn / tasks / tmp / xml2dict-read-only /
return (path);
)

int main (void)
(
char curdir [MAXPATH];

current_directory (curdir);
printf ("The current directory is% sn", curdir);

return 0;
)



Function name: getcwd
Function: get the current working directory
Usage: char * getcwd (char * buf, int n);
Program example:

# Include
# Include

int main (void)
(
char buffer [MAXPATH];

getcwd (buffer, MAXPATH);
printf ("The current directory is:% sn", buffer);
return 0;
)






Recommended links:



Easy Security And Privacy:



Bluesea DVD To MOV



SPARK Trilogy: to see How we change the world



Youtube Backup + Player Now



Huang Shan Secondary School



Tools AND Editors Directory



video MPG



Avc-free



I think the JSP problem (on)



how To convert mp3 to mp4



AlltoDVD MPEG to MP4



Professional CD VQF M3U to Sound Ripping



The Recycle Bin directly "invited" to the taskbar



Flv To Mp4 Converter



Saturday, July 3, 2010

Youtube Download + Converter Box

Hot popluar youtube video Converter + download + player tool. With YouTube tool you can also convert downloaded YouTube videos to a format compatible with your favorite portable device; including - iPod Video, iPod Touch, iPod Nano, iPhone, Zune, PSP, as well as video capable MP3 players, video capable mobile phones, and Pocket PC, And finally... YouTube tool's embedded player will allow you to watch all your favorite YouTube videos off-line. So now you can enjoy any .flv and .swf videos anytime!
Supports YouTube video or any .flv and .swf file as input file. Supports not only YouTube video, but also various video formats as input file, including avi, DivX, XviD, rm, rmvb, MOV, MPEG, WMV. Supports a wide variety of output file format., including avi, DivX, XviD, rm, rmvb, MOV, MPEG, WMV. Provides various profiles, these profiles can meet the needs of most people. - is the most powerful YouTube assistant on the planet.



Recommand Link:



Development Guide



video to Sony NWZ-E443 converter



rm to Avi



Adventure And Roleplay Wizard



Wellsoft Mobile Video Converter



BlueBird DVD Copy



CD AC3 to RM



YOUTUBE Video Save + Converter Tools



AlltoDVD MPG Converter



Convert DVD To IAudio 9



LasVegas AVI to 3GP



Good Web Or Video Cams



Christmas-Idea SWF to Mobile



Youtube Movie To DAT Popular



Youtube FLV Backup + Converter Store